Re: Bolts for trackball

[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by Jeff on January 09, 2002 at 19:00:21:

In Reply to: Bolts for trackball posted by MameBox on January 08, 2002 at 06:39:56:

The bolts I recieved from happs were also too short, I went to ace hardware and purchased
some 3" long carriage bolts they work fine , they stick out about a 1/4 inch past the housing.
Jeff

: I have purchased the 3" Trackball (part# 56-0100-xx) from Happ Controls together with the 3" mounting plate (part#55-1101-00). My problem is that I can't mount the trackball to the mounting plate. For me it seems that the 4 bolts that came with the mounting plate are to short. They are approx. 1.75" in length, but to me it seems like they ought to be something like 2.5" in length.
: Can anyone please confirm the correct length.
: Thanks.

Follow Ups:

Post a Followup

Name:
E-Mail:

Subject:

Comments:
: The bolts I recieved from happs were also too short, I went to ace hardware and purchased : some 3" long carriage bolts they work fine , they stick out about a 1/4 inch past the housing. : Jeff : : : I have purchased the 3" Trackball (part# 56-0100-xx) from Happ Controls together with the 3" mounting plate (part#55-1101-00). My problem is that I can't mount the trackball to the mounting plate. For me it seems that the 4 bolts that came with the mounting plate are to short. They are approx. 1.75" in length, but to me it seems like they ought to be something like 2.5" in length. : : Can anyone please confirm the correct length. : : Thanks.

Optional Link address (start with http://):
Link Title:
Optional Image address (start with http://):

[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]