Posted by Brian on 9, 2000 at 11:08 AM:
So I've got a Nintendo 20EZV monitor. I know it needs 100V and I've got the iso transformer to step it down so I'm set there. It's discharged so it's safe, but I have other questions about hooking up the RGB wires and other wires. I've included "links" to some pictures of what I have so it will hopefully make it easier to answer my questions. My
questions are:
1) How do I know what is what on the RGB board so I can hook it up correctly? I've only got 5 wires for the monitor coming from my PCB = R/G/B/Sync/Ground and I've got 6 wires coming from the RGB circuit board. Is there some way to tell what wire is what off of the circuit board?
http://www.geocities.com/brian_coney/LabeledRGBboard.jpg
2) Also, there are two wires comming from the circuit board on the rear right of the monitor (as seen in the pict). What do I do with these wires?
http://www.geocities.com/brian_coney/Closeuptwowireslabeled.jpg
3) Finally, What is the white square thing on the right side of the monitor shown in the picture? (labeled what is this?)
http://www.geocities.com/brian_coney/RearofMonitorLabeled.jpg
Any help on these questions would be REALLY appriciated!!
Thanks a lot!!!
Game on!! Brian