Posted by SirPoonga on February 25, 2002 at 14:33:19:
In Reply to: Re: Anyone have control panel pics posted by SirPoonga on February 25, 2002 at 14:29:49:
I did say my panel is 33" by 12"
Take out the spinner, use a 2.5" trackball, and shorten the edged (2.5" gaps) and it could get down to 24" inches.
REMEMBER to add int he thicknes of wood on the sides. I used 3/4" MDF for the panel with 3/4" pine block to screw into. That's an 1.5" on the edges I can't use. Did that to keep screws from showing. Jus thte plastic on top will have screws holding it down.