Re: control panel advice please?

[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by James Burrows on January 21, 2002 at 06:17:15:

In Reply to: Re: control panel advice please? posted by Rahzel on January 21, 2002 at 06:10:52:

: What you gotta do is cut out the design in the MDF. Then put all the holes in it. Next you clamp the lexan to the MDF and cut it to size VERY slowly with a jigsaw. Then for the holes just make sure the lexan is still clamped to the wood and turn the wood upsidedown and stick the drill in each hold and cut the lexan. Its best to clamp another peice of wood to the lexan so its sandwhiched between 2 peices to prevent it from cracking.

Thanks, I'll try that! :)



Follow Ups:


Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link address (start with http://):
Link Title:
Optional Image address (start with http://):

[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]