Posted by Andrew B on January 10, 2002 at 18:07:52:
In Reply to: car audio in cabinet questions posted by joe on January 10, 2002 at 17:32:22:
The main problem you are gonna have is findign a powersupply the run your amp, a 300W computer power supply will probably only put out about 10 amps at 12V , for a cap amp your gonna need quite a bit more then that, and one foot it probably too close to put the HD to a sub magnet.
: Hi - I'm building a custom cabinet and putting in a car audio system rather than an existing speaker/amp set - figured it would sound better and save some mounting hassle. So, questions:
: 1. Any pros/cons to bottom vs side firing subwoofer? If down, it would be firing down into a 3" toekick area so shouldn't be any airflow problems there.
: 2. I was figuring on using an amp that can work as a 3-way with a built crossover. Any issues with this plan?
: 3. Are there any issues with an 8/10" sub magnet sitting in close proximity to a hard drive? even if I have the system up on a shelf it will still be only a foot or so away from the sub.
: 4. What are the good brands and sources for this equipment? Been 10 years since I shopped for car audio..
: 5. Oh, is a 300W PC power supply sufficient to drive an amp?
: Any other suggestions welcome. Thanks in advance!
: joe