Re: play station contoller to a pannel board


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by LaMe_ on March 31, 2002 at 02:30:38:

In Reply to: play station contoller to a pannel board posted by david warren on March 29, 2002 at 23:33:18:

Hi
yes its very easy to do, i have done it with a NES and megadrive controller for an arcade cab,
really easy. grab a soldering iron and some solder, grab a spare PSX controller (or whatever ya wanna use) open it up usally with a small phillips screw driver and scratch the "hot" point to reveal the copper then simply solder your wires down to these points then connect a "cold" line around each button and then solder that down to one "cold" point on the board
there plenty of sites with pics and more detail
LaMe_
P.S. its a controll pannel not a pannel board

thats it



Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link address (start with http://):
Link Title:
Optional Image address (start with http://):


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]