Re: sticking trackballs (solution inside)


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by Ken Bloch on February 01, 2002 at 21:55:24:

In Reply to: sticking trackballs posted by telengard on February 01, 2002 at 02:32:01:

: I recently bought 2 happs 3" trackballs and they both have a real tough
: time rolling, it's even worse when they're installed in my panel.
: Any ideas on what it could be, or are there some adjustments I
: should make.

Check how tightly you fastened the trackball to the mounting plate. I noticed very little clearance on ONE SIDE of mt trackball, which was causing it to hang. I fixed the problem by loosening the bolts that keep the trackball against the mounting plate a bit. Rolls freely at all times now.

: While I'm at it, one of the clamps that hold my metal cp down is
: getting a little loose. Is there anyway to tighten these up?
: When I'm playing rougher games like Robotron the cp slips a little
: bit in the horizontal.

Try using turnbuckles, if it works on your cabinet.

: thanks!!





Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link address (start with http://):
Link Title:
Optional Image address (start with http://):


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]