Thanks Dave, you and Barry cleared things up perfectly -nt


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by mhoward211 on February 07, 2002 at 13:52:51:

In Reply to: Re: you dumb ASS posted by Dave K. on February 07, 2002 at 13:33:58:

: I think you didn't understand his question (now who is the dumb ass?).

: If the monitor came from a jamma cabinet, you will almost certainly need to plug the monitor into an isolation transformer (the original power setup inside the cab). Only the most recent monitors (last couple years) have power isolation built into the chasis. These monitors usually have a 3 prong PC type power connector. If you see just two wires coming out for power, you NEED an isolation transformer (or you will blow the fuses on your chasis).

: -Dave

: : Where do you plug your MONITOR to get power from ? DUMB ASS





Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link address (start with http://):
Link Title:
Optional Image address (start with http://):


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]