Re: Dave? DC Hookup!?!


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by Dave K. on January 29, 2002 at 20:40:17:

In Reply to: Dave? DC Hookup!?! posted by mAd SmuRf on January 29, 2002 at 19:07:56:

My webpage doesn't have any info...just pics of my cab conversion I did in 1999 (http://bfn.org/~bu030/dreamcast.html). Also, I didn't go the Jamma route, I bypassed all that and interfaced the monitor and control panel directly. There is another website that has some info for a jamma connection using a SCART cable (http://www.mameworld.net/pc2jamma/arc_dc4.html).

My VGA hack is this: buy the Blaze DC Adapter (http://www.ebgames.com/ebx/categories/products/product.asp?pf_id=176053) trace the 31khz pin on the connector end to where it connects to the VGA adapter PCB (pin/wire 7 I believe) and cut it (or install a spsd switch). This will force the adapter to only output 15khz rgbhv. Hack a VGA cable and splice the RGBHV to your monitor inputs. Use the stereo out (with volume control to adjust line out distortion) for sound. You can find the DC AV pinout at www.gamesx.com.

This may also work for Jamma if you connect both H/V syncs to the composite sync input of the jamma connector (but don't quote me on it).

I guess an alternate solution would be for you to just use the VGA adapter normally and connect to your Scan Do converter.

The DC2Jamma page mentioned above has info for hacking the controls (pretty simple). I suggest hacking the Madcatz pads as they are easier with solder connections points on the back of the pcb (rather than trying to solder to the button contacts).

-Dave
(remove N-O-S-P-A-M. from email)

: Thank you kind sir... I already do have a DC in there right now, however it is just going through the S-Video input on an add on video capture card for now.... what was your web page link again... you can email it to me if you wish.

: Otherwise, I had a couple questions about your VGA box hack that you have setup on your DC 2 Jamma setup. thanks

: MS

: ---------------------------------------------

: : Congrats mAd SmuRf, you deserve it...awsome cab! Why not go even further and stick a Dreamcast in there to play all the modern Capcom games! I'm really thinking of getting one of these sit at cabs myself.

: : -Dave





Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link address (start with http://):
Link Title:
Optional Image address (start with http://):


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]