Re: Another question

[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by Ryan on January 16, 2002 at 06:25:41:

In Reply to: Re: Another question posted by Dave Aksteter on January 15, 2002 at 10:28:34:

I have used a Male HD15 to Female HD15 VGA cable to got from the AVerkey to a JPAC and that works
fine. I have also made my own PCB to connect to
AVerkey to a JAMMA connector.
Ryan


: It appears that most use some sort of 15-pin propriatary connector. I see the Avermedia pinouts on this page:

: http://www.hut.fi/Misc/Electronics/circuits/vga2tv/rgb_commercial.html

:
: :
: : What kind of connector do the Avermedia devices use for RGB out then? Obviously not BNC...?

: : Thanks again,

: : Dave




Follow Ups:


Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link address (start with http://):
Link Title:
Optional Image address (start with http://):

[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]