Re: HELP!!...Why with DOS many roms have problem with memory!?!?


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by Slim Jim on 27, 2000 at 1:04 PM:

In Reply to: HELP!!...Why with DOS many roms have problem with memory!?!? posted by JIMI on 27, 2000 at 10:48 AM:

5 years ago, I could have answered this in a jiffy, as I used to could squeeze memory from a lemon if I had to. But now.. :) When Win95 came along, it started handling all that for me, and I have about lost knowledge. What I used to do when all else failed, was use memmaker. If I'm not mistaken, true Dos still uses the first (is it 640k or 1028k +56k or something) kb for drivers and such. I hardly ever used smartdrive. I bet it is a memory allocation parameter you need to set somewhere. Another good approach, is to boot up windows... then shut down to dos, (and even just try a dos prompt) and see if it works. (If so.. search for a file called dosstart.bat in the windows dir, and integrate that to your Dos only boot up.). I haven't had this problem in years, and my description may be old as the hills heh. But the best thing to do, is just experiment. back up your config.sys, and autoexec.bat files, and go to town. Use memmaker if all else fails :) Gosh I wish I knew the answer to this myself... now I want to dig up and find a solution.

...: Hi...
: I have a cabinet with a real arcade monitor inside...
: All work well but when I use Roms-games like NEOGEO
: litte too BIG the PC not work ..one FAULT error or TILT...I try to change mame program and release...like NEOMAME...(this work better with the NeoGames and have ALL inside them , also MetalSlugX).
: The problem is when the load is near to be completly
: c1.c2.c3.c4.....TONF!! Error or Tilt!! I think was a problem of memry...inside I haved 64 Mb Edo...meaby not to much for this game or KingOfFighter99....
: So now I have 128 Mb...but still not work...also KoF 98
: ...middle load is ok and later the HD begine to work like the memory is not much..and later error!!!
: I try without HL SMARTDRV but every configuration have thesame problem....
: What Can I do because AOS & NEOMAME or MAME can accept
: also the big roms ??? 128 Mb is good I think!!

: last...I must say that..in Windows..al work good..also
: with 64 MB....GRRRRRRRRRRR!!!!!!!!




Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]