Re: Wiring questions for Dreamcast Pad Hack


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by Aaron on 25, 2000 at 8:07 PM:

In Reply to: Re: Wiring questions for Dreamcast Pad Hack posted by Aaron on 25, 2000 at 8:07 PM:

: I have finished wiring my Mame cabinet using 2 playstation controllers (Cheap ones). I presume most of these controlers are set up similar to the dreamcast. I soldered one wire for ground on each controller. The ground ran through all of the contacts for each button and directional pad contacts. I figured it would be pointless to solder each ground for each button. I also daisy chained all the grounds on my arcade controls. The original controls were daisy chained up as well concerning the grounds. Everything works great. Hope this answers your question.





Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]