Re: How to connect a tv adapter to an arcade monitor


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by powerjaw on September 07, 1999 at 17:52:35:

In Reply to: How to connect a tv adapter to an arcade monitor posted by Mike on September 07, 1999 at 17:18:39:

Yes, that will work. From your pinout, you only need pins 7, 11, 15, 17 and 20. You'd connect it to the monitor like this:

7 - Blue
11 - Green
15 - Red
17 - Ground
20 - Composite sync

Tim


: I have a vga to tv adapter that I currently have connected to a TV. The lead that goes into the Tv as a 20 pin scart connector, however only 6 of the wires are used 7,11,15,16,17 and 20

: I got this information from a scart pinout chart ,no idea what it means

: 7 Blue in: 700mV 75 ohm
: 11 Green in: 700mV 75 ohm
: 15 Red in: 700mV 75 ohm
: 16 Status RGB: 0-0, 4V 1-3V (fast blanking)
: 17 CVBS earth
: 20 CVBS in: 1V 75 ohm

: Would it be possible to connect the adapter to an arcade monitor using the above wires, any ideas how?

: Thanks Mike




Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]