403 accessing your page...


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by Prophet of Retrogames on 10, 2000 at 5:14 PM:

In Reply to: Re: How do I install a trackball in wood control panel. posted by Brian on 10, 2000 at 1:20 PM:

Hey Brian, I wanted to read your trakball info too, but I get a 403 error with the link you gave. :(

URL: http://www.geocities.com/brian_coney/

"Forbidden

You don't have permission to access /brian_coney/ on this server.

Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request."

-P-
www.retrogames.com

: Check out my site and go to the modified control panel link at the bottom. I have a write-up on how I installed my trackball in 3/4" wood and 1/8" plexi. It should help a little.

: Game on!! Brian


: : I just ordered a trackball 2 1/4" from Happs and am trying to figure out how I will mount it. I have 5/8" wood and a 1/8" Plexiglas control panel. It would seem that I will need to do something other than drill a hole for the ball. Maybe I will need to cut a square out of the control panel, mount the trackball to the trackball plate then mount the plate on top of the Plexiglas.

: : I have had no problem cutting the Plexiglas with a 1 1/8 hole bit but I am thinking I will need to cut a different type hole for the trackball and would like tips from those who have done this. Tom A?

: : Thanks.




Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]