Posted by EmuMannen on 30, 2000 at 5:06 PM:
In Reply to: New Spinner knob option for any spinner... posted by Fultra on 30, 2000 at 11:57 AM:
I was looking for the optimal spinner knob in Sweden and what i found was knobs made by a German company named MENTOR. They do have agents around the world (info at http://www.mentor-components.de/auslande.htm).
he knobs are quite cheap in Sweden (and that's unusual) and it looks like the quality are "German as a Merzedes Bentz".
An example of an cool aluminium knob with a diameter of 36mm for a 6mm axis, check out part numbers:
534.6 Aluminium non colored
534.603 Aluminium black
This knob serie have caps in different colors with or without indicator.
Other nice aluminium knobs are:
5556.6612 d 35mm, a 6mm, colourless, indicator
539.61 d 35mm, a 6mm, colourless, no indicator
539.611 d 35mm, a 6mm, colourless, indicator
539.613 d 35mm, a 6mm, black, no indicator
539.6131 d 35mm, a 6mm, black, indicator
513.61 d 30mm, a 6mm, colourless, no indicator
515.61 d 50mm, a 6mm, colourless, no indicator
523.61 d 30mm, a 6mm, colourless, indicator
524.61 d 40mm, a 6mm, colourless, indicator
523.6191 d 30mm, a 6mm, colourless, indicator
These knobs must be seen!
/ EmuMannen
: If your spinner uses a .25" shaft (Fultra & TwistyGrip both do), look at the link below.
: The knob is the worst part about both of these spinners b/c it looks like a volume knob. But it was all we could find that wasn't $15.00.
: There is another knob that I found - it is about $4-5 dollars - but cheaper in quantity. If we get a group that wants some of these I could place a bulk order and then sell them.