Re: Help connecting PC to Electrohome G07-CB0


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by Tom61 on 11, 2000 at 3:23 PM:

In Reply to: Help connecting PC to Electrohome G07-CB0 posted by Stephen Stormont on 10, 2000 at 8:29 PM:

got incabinet=1 set in arcadeos.cfg?

: Thanks to Mr. Salty I've gotten further on this project, but figured I'd throw out my situation and see if anyone else has any ideas. I made the adapter cable from a monitor cable (red, green, blue, ground, v sync, h sync) and hooked it up to the negative h and v syncs on the monitor. Problem I have is that the image displayed onscreen, via arcadeos is repeated 4 or five times. I tried flipping the orientation in arcadeos, but no dice. Tried hooking up the syncs to the positive h and v, but that didn't help. Any ideas?




Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]