connector


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls faq NEW message board ] [ FAQ ]

Posted by Andy Desak on July 12, 1999 at 20:08:11:

In Reply to: Name of Connector for LP24??? posted by Nate Thompson on July 12, 1999 at 20:06:24:

Hi Nate,

My receipt from the last batch I got reads....

MTA 13 position header with 30 inch wires

This is for the KE24 and you need 2 of them for one encoder....I imagine you would
use the same one for your LP24 but would not use one of the connectors.

Also you may notice it says 30 inch wires. I think their standard is only 18 but they
will make any size you need for the cost of the wire.

I always talk to the same guy but I cant remember his name....if whoever you talk
to doesnt know what you want then I would ask to speak to someone else.

-Andy Desak
Arcade Solutions
http://members.home.net:80/hutt1/home.htm

BTW Nate if you still want that T-molding let me know and I could order it for
you....if you get the whole 100' you will have plenty. I didnt get a chance to
measure the cab to see what you need yet....lemme know if you still want me to.


Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls faq NEW message board ] [ FAQ ]