Found the card I was talking about


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by Tom61 on 30, 2000 at 10:08 PM:

In Reply to: Re: Help on plans for mame/jamma cabinet PLEASE HELP posted by Tom61 on 30, 2000 at 8:45 PM:

The card that has the bug I was talking about is the STB Velocity 128 TV, took me a while to find the page that talks about it. http://members.tripod.com/~qtfemme/mama/


: : Here was my plan:

: : -getting a fully functional jamma cabinet for $100 (i have one lined up, tested, ready for me to give money)
: : -wiring control panel to some sort of "switch board"
: : -to switchboard wire two daisy chained sidewinders to hook up to pc on one "switch" and on other "switch" wire jamma harness which is hooked to arcade monitor

: Sounds like it'll work

: : -from pc wire to both a pc monitor and an arcade monitor (

: :Questions: to wire to an arcade monitor is it necessary to get a special graphics card with tv out or can you just wire it in from your pc's monitor out?

: It will wire into the monitor out.

:
: :Also, do graphics cards with tv out have a special adapter to hook to a tv or is it essentially the same as hooking to a monitor?

: A card with TV out will usually come with a special cable to hook to a TV, the connector for it will usually be below the monitor connector.

: :When I hook my monitor into my pc, am I hooking it into the video card?)

: Yes


: : -I want a separate monitor also hooked up so I can still use my computer for computing needs.

: no problem, though you need to run one at a time, becuase an arcade monitor uses a different frequency than a computer monitor. If you leave the arcade monitor on in windows you'll damage it, if you're running ArcadeOS with your PC monitor on you'll damage it.

: : -I want to be able to run emulators through the pc and jamma through the original cab making this a mame/jamma machine.

: I'm going that route myself

: : -I want to be able to run windows on my arcade monitor so I can use the sidewinders. THIS IS MY REAL DILEMMA! IF I CAN'T BOOT UP TO WINDOWS ON AN ARCADE MONITOR HOW CAN I USE MY SIDEWINDER CONTROL PANEL?

: Placing ArcadeOS in your startup folder might work... there is an older video card that had a "bug" that when you plugged in the TV-out it caused the wrong frequency to go to the monitor, the frequency it outputs is compatable with an arcade monitor.

: :I also want to be able to run NeoRageX on my cabinet. I heard as long as it is dos I can run any program through arcadeOS on my arcade monitor. Is this true?

: most DOS programs can be run through ArcadeOS without trouble.

: : Any help would be great. Thanks for reading!




Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]