Wire up the adapter to the cabinet power.. then it will all be self contained with one plug :) *NT


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by Jim K on 12, 2000 at 3:43 AM:

In Reply to: Re: Yet another coin door light question... posted by LuSID on 11, 2000 at 9:44 PM:

: Most of those bulbs take 12V-14V DC. Just wire them in parallel to a 12V supply. You should be able to get one at any electronics store.

: I used the PC's power supply for mine, but the way yours is setup it's better just to get a cheap 12V adapter.

: -LuSiD

: : I know it has been asked before (because I've asked before) but how can I hook up the lights in the coin door of my cabinet. The reason i am asking again is because most responces refer to keyboard hacks and such. The problem is, my cabinet and computer are separate. The cab only has the WG3100 and hacked GamePad Pro's, all hooked up externaly to the computer. With this in mind, is it at all possible to hook the lights up? I know it may seem petty, but I use the coin slots while playing to keep it as authentic as possible. Considering my favorite time to play is at night in complete darkness, no lights in the coin slots makes it kind of a pain. Thanks for any help you can give.




Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]