Posted by Joe on November 08, 1999 at 12:28:43:
In Reply to: Re: how about a powered rotating monitor posted by Shawn Atari on November 08, 1999 at 12:07:33:
: : Anyway I had this idea that by using a worm gear, or powered roller on a large diameter bearing, I could power the rotation of the monitor so it could be rotated on the fly without needing to open the cab at all. I really think the hardest part is the rotating monitor, moterizing would be easy. Something as simple as a couple of micro switches could be used to detect when its in the correct position and a solenoid could push a couple of locking devides into place once in position to stop unwanted movement.
:
: I had the same idea. The solution I came up with was to use the motor from an electric car window.
: This already runs on 12VDC which the PC power supply already produces.
: I would then wire up three arcade buttons: up, down, and degauss. I have found that I need to degauss the monitor after I rotate it. I like your idea of a relay to tell it when to stop turning.
: Just my two cents.