Re: You don't need the power supply if you are using the ME4


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by Marty on 25, 2001 at 10:50 AM:

In Reply to: You don't need the power supply if you are using the ME4 posted by Brian on 25, 2001 at 9:14 AM:

ummm, never mind, not enough coffee yet this morning apparently. =)

Thanks for the help.

: With the ME4 you should've gotten a connector that connects to the trackball axis and then to the ME4. This is how the trackball gets the power....by going through the ME4. So all you need is 1. Trackball, 2. ME4, and 3. Chord from the ME4 to the trackball. You don't need the power supply that you bought.

: Game on!! Brian

:
: : Hi there,

: : I recently bought myself a 3" Happ trackball and the power supply to go with it... I am using a Hagstrom ME4 as my interface for the trackball and a spinner. This is probably a stupid question, but how do I get power to the trackball? The power supply only has a black wire and a black/white stripe wire....where do I connect these on the interface? Or have I completely missed something here?

: : Thanks for your help

: : Marty





Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]