Posted by scott oberg on November 02, 1999 at 23:46:48:
In Reply to: Monitor problems posted by Jerky on November 02, 1999 at 23:19:26:
...to reset all of the color purity rings? If the wrong gun is striking the wrong phosphors, sometimes you'll lose a colour. Moving a cab can often totally screw up the guns. I recommend trying the following procedure first: http://www.geocities.com/Area51/Station/3975/convergence.html
I think that that Bob whoevers site (you know the one) has a whack of cap kits.
: I just pick up a konomi bucky o'hare jamma cabinet for $50.00,
: I'm not sure what the original cabinet was. But it is too cool.
: My orignal plan was to just use the cabinet for a mame cabinet,
: but it works, so I might leave it alone. It is very big
: with a 25" monitor. Here is the problem that I have:The colors
: are not all there, after making all possible adjustments I can't
: seem to get the color yellow. Also it seems a little dim,but
: after adjusting the brightness the colors seemed to fade.
: It is an R.C.A. monitor models # A63ABG25X.
: Do I need a cap kit, and if I do where might I find One?
: Also any help with this would be greatly appreciated.
: Thanks in advance,
: Jerky