Re: Can't seem to get Blade3d to work w/arcade monitor--any ideas?

Posted by Tom61 on 14, 2001 at 5:12 PM:

In Reply to: Can't seem to get Blade3d to work w/arcade monitor--any ideas? posted by Dave Aksteter on 14, 2001 at 10:38 AM:

Search the messageboard archives, I remember soemelse had a simular problem and added capacitors to fix it... Also, try using MonArc instead of the Arcade Monitor option of ArcadeOS.

: Seeing as how there's a few people here making this combo work well for them. I'm puzzled as to why I can't seem to get it. Using a 19" Electrohome std. res. monitor built in 1980, I have to fight with the horiz. sync to get the blade3d image to show, and when it does, is isn't stable and will also go out of sync if resolutions change. I can, however, seem to get my desktop card, a GeForce 256 DDR to work stable enough with the arcade monitor. Is the Geforce putting out a stronger signal then the Blade? I am using a switch box to "activate" the monitor when the machine boots into ArcadeOS which has a 6' cable between it and the card, maybe there's some signal loss there?

: Thanks,

: DA

Follow Ups:

• SOLUTION!! Separtate your HSync and VSync wires on your cable hack -more dhansen 5/14/2001 (2)
  • You Rock!! (and Mr. Salty too) Dave Aksteter 5/15/2001 (0)
  • Negative HSync and VSync that is.... dhansen 5/14/2001 (0)

Post a Followup