Posted by Lindner24 on 15, 2001 at 3:46 PM:
In Reply to: Re: I need help with something...... posted by Lindner24 on 15, 2001 at 3:16 PM:
First column = Fractional inches
Second column = Decimal inches
Third column = Metric millimeters
1/64====.015625====.3969
1/32====.03125=====.7938
3/64====.046875===1.1906
1/16====.0625=====1.5875
5/64====.078125===1.9844
3/32====.09375====2.3812
7/64====.109375===2.7781
1/8=====.125======3.175
9/64====.140625===3.5719
5/32====.15625====3.9688
11/64===.171875===4.3656
3/16====.1875=====4.7625
13/64===.203125===5.1594
7/32====.21875====5.5562
15/64===.234375===5.9531
1/4=====.250======6.35
17/64===.265625===6.7469
9/32====.28125====7.1438
19/64===.296875===7.5406
5/16====.3125=====7.9375
21/64===.328125===8.3344
11/32===.34375====8.7312
23/64===.359375===9.1281
3/8=====.375======9.525
25/64===.390625===9.9219
13/32===.40625===10.3188
27/64===.421875==10.7156
7/16====.4375====11.1125
29/64===.453125==11.5094
15/32===.46875===11.9062
31/64===.484375==12.3031
1/2=====.500=====12.7
33/64===.515625==13.0969
17/32===.53125===13.4938
35/64===.546875==13.8906
9/16====.5625====14.2875
37/64===.578125==14.6844
19/32===.59375===15.0812
39/64===.609375==15.4781
5/8=====.625=====15.875
41/64===.640625==16.2719
21/32===.65625===16.6688
43/64===.671875==17.0656
11/16===.6875====17.4625
45/64===.703125==17.8594
23/32===.718875==18.2562
47/64===.734375==18.6531
3/4=====.750=====19.05
49/64===.765625==19.4469
25/32===.78125===19.8438
51/64===.796875==20.2406
13/16===.8125====20.6375
53/64===.828125==21.0344
27/32===.84375===21.4312
55/64===.859375==21.8281
7/8=====.875=====22.225
57/64===.890625==22.6219
29/32===.90625===23.0188
59/64===.921875==23.4156
15/16===.9375====23.8125
61/64===.953125==24.2094
31/32===.96875===24.6062
63/64===.984375==25.0031
1======1.0000====25.4
:
: : Hi,
: : I have a question. I was looking in the new catalog from Happ Controls, and I noticed that the measurements for stuff are weird. How am I suppost to measure 5.90" with a ruler?
: : Call me stupid but I only understand measurements when there writen out like 1 3/4" and so on. Is there a way to convert 5.90" to something I'll understand?
: : Dumpster Tom