Posted by arcadepcnut on 23, 2001 at 2:59 PM:
In Reply to: Re: ARCADEOS + ATI XPERT98 AGP 8MB posted by David on 22, 2001 at 4:12 PM:
Sounds like you need to edit your mame.cfg file and put ntsc as your video mode.
: : : Hi:
: : : Im making a PC2JAMMA with my HANTAREX MTC9000 Cabinet. The first time I used a S3VIRGE to make the VIDEO OUT from PC to HANTAREX, with the S3 only works VSYNCMAME, but today I buy a ATI XPERT98 because I want to use the ARCADEOS frontend, but I have a Problem:
: : : When I start ARCADEOS, after the 3beeps I power up my Cabinet, but in the screeen I can only see the siluete of ARCADEOS and a lot of Coloured Lines moving in screen.
: :
: : Hello, I have the same setup. Have you got the arcadeOS.cfg set to arcade monitor?
: : : Anyone can helpme with the problem???
: : : Im using separated Syncs, vertical and horizontal, not composite sync. (HANTAREX support the two types of sync composync and separated sync)
: : : Thanks
: Hi:
: First say you thanks for your post.
: Yes I put the ARCADEOS.CFG in ARCADE MONITOR mode, but I cant get a good image.
: In my ATIXPERT98 chips appears: RAGE XL, you have the same video card?
: Im going crazy with this problem but today I found something interesting:
: I use the AMCAB 0.8 (a pack of video tools 'VGA' 'VBE' 'MV' 'VIDEO').
: If I run VGA.exe after boot the MSDOS I can see the MSDOS PROMPT and EDIT and other tools perfect.
: VGA run a lot of VIDEO MOVIES in 15khz mode.
: After running de VGA tsr program I start the ARCADEOS with this option:
: #Using external arcade monitor TSR (such as MonARC)
: extdriver=1
: And I can see a good quality image of ARCADEOS, but when I start a mame rom in the screen apears THIS!!!!:
: The same game in two little screens one in the left of screen and the other in the right and streched.
: If you can sendme your arcadeos.cfg or info about your configuration you help me a lot.
: Thanks for all