Posted by jmark on 5, 2001 at 9:36 PM:
In Reply to: Need help wiring video from a jamma board posted by Canufcoke on 5, 2001 at 8:32 PM:
Hey,
There are several ways to do this although unfortunately none of the solutions are particularly cheap. There is a guy called JROK (www.jrok.com) who sells an RGB to Composite/S-Video convertor which is probably the best value for money solution.
I bought a converter from him a while back as I was planning to use one to hook up JAMMA boards to a PC monitor via a VGA-box, but needed to convert the JAMMA signal into an S-video or composite signal first. Combined this solution cost me about $150!! I ended up actually buying a WG D9200 monitor which allows me to connect JAMMA boards DIRECTLY as well as use it as a regular VGA monitor and therefore I now have $150 of equipment gathering dust! Doh!! I can be persuaded to let my unused RGB-NTSC convertor go for around $70 if you're interested (I believe JROK charges around $95)...
Regardless, see the web link below for more info.
Mark
: Can anyone help me or point me to site that will show me how to connect to a tv (S-video or A/V) from a jamma board.
: Thanks!