Re: Add undocumented buttons to your Hot Rod SE

Subject:

Comments:
: : I was thinking it would be nice to add P/TAB/ESC keys to my HotRodSE. But thought it might be a pain. So I deceided to take a peek in the cabinet anyway. (attn: HanaHo, I am a Canada wide certified Technician, so don't void my warranty. It says only to be opened by qualified technicians in the warranty. :-) ) : : Anyways. Low and behold, it is extremly easy to add these. : : On the circuit board there are a bunch of connectors. 1 connector only has 2 wires in it. This connector does switches 25 - 32 per the silk screen on the board. Hmm.... I wonder. The sitches are active low, meaning you ground the contact to activate. So 25 & 26 are used. That leaves 27 - 32. Grounding these comes up with (including 25 & 26 for reference) : : 25 - X : : 26 - [ : : 27 - ESC : : 28 - ENTER : : 29 - TAB : : 30 - F1 : : 31 - UNKNOWN (does not seem to do anything) : : 32 - P : : So all you have to do is add a switch to these lines on the connector with one side of the switch going to ground. : : Have fun. : : Derrick : : P.S. I found these out when I was modifing the joysticks to allow switch selectable 4-way mode and a special diagonal -to- 4 way mode so Q-bert operates properly on diagonals instead of the joystick being 45 degrees out as it is now. It seems Q-bert used a 4-way joystick mounted 45 degrees clockwise. : : More info on this in a couple of weeks when I get photos. : : www.rentrondesign.homestead.com : Nice tip about the HotRod. : For Q-bert: : Press Tab. : Go into Input (For this game) : set your controls in Mame to the following: : Right=Right Down : Left=Left Up : Up=Up Right : Down=Down Left : you can do Right Down by hitting right then hitting down

Optional Link URL:
Link Title:
Optional Image URL: