Posted by saint on October 08, 1999 at 09:53:04:
In Reply to: Re: Twisty grip spinner. posted by Michael Bobroski on October 08, 1999 at 00:48:22:
That sounds like something I'd like to post with
a brief explanation like you posted... Can you
send me the scan...
--- saint
: I ran into the same problem. After speaking to
: the 'Twisty Guy', we decided that this would be
: be easiest (but not easy!):
: He sent me a scan of the opti-wheel without 'every
: other spoke knocked off'. I then printed it on a sheet
: of transparency (For thickness and plastic-like quality),
: used an exacto knife to cut it out (Yes, each spoke), colored
: it black with a Sharpie, and applied it to the existing opti-
: wheel w/ double-sided tape.
: The other, easier option would have been to replace the wheel
: entirely, but it seems to be glued in fairly tight.
: I still have the scans if you want 'em.
: -Mike
: : I put together a twisty grip spinner. I can get it to work very well for tempest, but not well for Arkanoid.
: : It seems to be either too jumpy and imprecise or too slow, with nothing in the middle. Is this other people's experience? Is there anything that can be done to help its performance in Arkanoid?