Re: AVerkey with Scart RGB works with Arcade Monitor.

Subject:

Comments:
: The NTSC versions won't have scart output. We're living in the stone age in the US. : Tim : : : I noticed at work some scan converters for repair that had Scart RGB : : output on them and wondered if that would work with an : : arcade monitor, it does!. It is the first time I have : : seen the bios boot up on my arcade monitor. I used : : two differnt models of the AVerkey the AVerkey3+ and : : the AVerkey500. Both are the same except that the AVerkey500 has sharpness control and more inputs and : : outputs. The picture on both looked the same except the 500 with the 2 levels of sharpness made the picture a bit clearer one the first level the second level made : : the picture clearer but with flicker ( the same as monarc in 640x480 mode). : : The only bad thing is that : : the screen was cut off at the top I am using the PAL : : version which has 625 lines on an arcade monitor which : : is NTSC 525 lines, maybe a NTSC version of the AVerkey : : would fit the whole screen in? Also one other minor : : thing is that the power does not come on automatically : : so if you were to put this in a cab you would have to : : power this up sepatate. : : The Scart RGB out on the unit is a HD15 female so it is : : very easy to hook up the the Jamma harness. I have not : : got any more info on these units as I just have the unit itself no manual of remote control etc. But there : : is a web site, I don't know how much they cost either. : : Has anyone else done this? : : Ryan : :

Optional Link URL:
Link Title:
Optional Image URL: