Re: Discharging Arcade Monitor's Anode


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by Lindner24 on 12, 2001 at 7:33 PM:

In Reply to: Re: Discharging Arcade Monitor's Anode posted by Lindner24 on 12, 2001 at 7:20 PM:

Now that I think about it, I don't know if you want to glue that thing down. It would make it very hard to discharge/remove in the future.

: Here's a link on installing a cap kit, it also has instructions on discharging a monitor. Mind you, this is not the safest way and is refered to as the 'short cut' method. Take a look at saints write-up under Tech&Tips>Monitors. Above all, take all precautions and be cafeful.

: http://www.arcadeobsession.com/capkit.html

:
: : Does anyone know the safest way to discharge the anode on an arcade monitor? the anode is starting to curl up and I want to discharge it and glue it back down. I'm just trying to do this without getting fried. Thanks, tb




Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]