Posted by Andy Warne on 6, 2001 at 4:40 PM:
In Reply to: Wire pinout for Fultra Spinner posted by Ron Critchfield on 6, 2001 at 12:48 AM:
http://www.andywarne.pwp.blueyonder.co.uk/diyopto.htm
: I have a question for anyone who is using the Fultra Spinner. If your using the USB interface, please contact me directly.
: On the serial harness there are two four wire plugs.
: Each plug has a red and a black wire, and then two other wires. On the board sent with the spinner there are four pins. One pin is labeled J1 and one pin is labeled D1. Starting with J1, what are the colors of your wires?
: Thanks,
: Ron