Posted by GAP on 2, 2001 at 11:08 AM:
In Reply to: Mmmm posted by jmark on 1, 2001 at 11:26 PM:
Hey, Mark, thanks for the reply. I've just about given up on finding 5/8" MDF and adjusted my design to reflect 3/4". I guess the Happ t-molding will just sit on the shelf.
I'm going to Home Depot after work and have them cut up a few sheets for me so they fit in my Explorer.
I'm in Alpharetta, btw. I appreciate the offer for the t-molding, I'll let you know after I choose the laminate for the sides. I'm leaning towards something pretty dark that might look better with black t-molding.
Again, thanks for the reply!
: Hey GAP,
: I've only managed to find 3/4" here in town too... both Home Depot and Lowes seem to only carry 3/4" and not the 5/8" you want...
: Where in Atlanta are you? I probably have about 20 feet of grey 3/4" t-molding left after my cab is finished (I have 40 feet now) which you're welcome to... I also have 40 feet of 3/4" RED t-molding which I REALLY DON'T WANT (I was smoking a particularly big crack pipe when I ordered that!!?!)...
: Later,
: Mark
: : Maybe a dumb question, but where the heck can I find 5/8" medium density fibreboard?
: : Home Depot and Lowes only has 3/4", but I'd rather have 5/8" to save weight. My cab will have a 2x4 frame, so doesn't need the thicker MDF.
: : Also, like an idiot I already bought a bunch of 5/8" t-molding from Happ.
: : Finally, I'd prefer somewhere that'd make a few initial cuts to the 4'x8' sheets. This would save me from having to borrow a truck as well as save time.