A few finishing up questions


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by Clegg on September 30, 1999 at 14:36:26:

1. I want to place a switch on the front of my cabinet, so I can turn on the monitor after arcadeos as beeped 3 times. The three wires that go into the cabinet from the mains (live, neutral and ground) are connected to the Isolation Transformer, (the live is fused first) I don't want to mess with the wiring from here onwards, so would it be ok to attach the switch to the live and neutral wires that come from the mains. Also As the switch only as 4 connectors (2 in 2 out) is it ok to leave the ground intact so it goes directly to the isolation transformer.

2. Would it damage a tower case PC if you lied it down flat, I want to mount it inside my cabinet.

3. I am concerned that the PC will not get enough air to the fan when its inside the cabinet, would it be a good idea to stick a small external fan infront of the PC to help cool it.

Thanks for your help
Clegg



Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]