Re: monitor prob


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by Mark Ormond on September 27, 1999 at 22:08:36:

In Reply to: Re: monitor prob posted by kkid on September 27, 1999 at 17:55:17:

:
: : : okay, seems my monitor isnt showing any red's., every other
: : : colour is there, expect for red...

: : : i turn up the red cutoffs, and can get all my Blacks turn to
: : : red, but thats no good.

: : : anyone experience this type of problem?
: : : should i look into getting a capkit replacement?

: : is it possible your red signal cable has become loose? Perhaphs thats the prob

: i re-did the red cable especially..

: but lets say i had no blue wire connected... would it not
: show any blues? is this how it works?

The common test in a standard machine is to take a
input wire from one of your colors that work (i.e. blue) and send it to your red input. If you have red then you have a problem getting from your input into the monitor. If you still have no red, your monitor probally has board problems.
If so check in your yellow pages for amusement vendors and see if any of them do monitor repairs.
One of the places where I live does monitor repairs real cheap. (Last on I needed fixed blew out it horz control chip and they fixed it for 65.00 (25" btw)

Later,
dabone



Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]