Re: CANNOT get vertical roll to stop...... Mr. Salty??? anyone???


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by dhansen on 11, 2001 at 12:00 AM:

In Reply to: CANNOT get vertical roll to stop...... Mr. Salty??? anyone??? posted by Agent Davis on 10, 2001 at 11:34 PM:

: Okay I cannot get my arcade monitor to stop rolling vertically. I read in the messages where someone else had this problem and his problem was exactly the same. By hooking only H. sync up i get just a slight vertical roll after fine tuning. However here is where my problem is different: When I twist the vertical sync with the h. sync the screen goes completely scrambled with horizontal lines basically. I have tried fine tuning it afterwords but to no avail? Any suggestions???

Does your monitor have a separate h-sync and v-sync? I was experiencing the same problems when I went to my Trident Blade 3d card from the cirrus based card I was using before. With the cirrus card I twisted the h & v sync together and everything worked perfectly but as soon as I switched to the Trident card I couldn't get it to stop rolling. Finally I hooked up the h-sync and v-sync separately and viola! It worked great.

Doug


Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]