Re: Joystick mounting question -- wood screws or through bolts?


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by Tasky on 27, 2000 at 5:30 PM:

In Reply to: Joystick mounting question -- wood screws or through bolts? posted by SaLtLyCk on 26, 2000 at 4:10 PM:

: I just finished mounting my joysticks to a 3/4 inch piece of pressboard covered with laminate. I was going to use through bolts on the panel but figured I could get a better look by just mounting the joysticks from the bottom with wood screws. They mounted fine and they play great (I put it through a few days of abuse with the family in town). I have searched the archives and the message board and found that a few of you have done this but there is no follow-up to this method. I am curious as to whether this will be strong enough for my home machine? Has anyone used this method and had problems, if so please give me some pros and cons, it is no skin off my back to go back and use through bolts to prevent future problems.

: TIA

I did mine with Flush Mount black bolts from the top. Since the top of my CP is black with a marble swirl pattern in it, you can even see the bolts unless you are looking for them.



Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]