Posted by dhansen on 27, 2000 at 12:32 AM:
In Reply to: Re: New Control Panel posted by Just Michael on 26, 2000 at 11:32 PM:
I think I tried that Q-bert config and it didn't seem right. I'll try it again.
thx
: : : Hello! I'm building a new control panel for my machine and I'm wondering if there are any issues to having two joysticks wired to the same controller.
: : Should not be any problem having two joysticks wired in parallel with each other
: : : I'm going to have a dedicated 4-way controller in the middle and I would like to wire it with my player 1 joystick. Or should I use button controls for buttons 7 and 8 on my IPAC since I'm not using them anyway.... your suggestions, as always, are appreciated.
: : Im looking to do a similar hookup with a 4-way (Pac Man etc..) that I can also rotate 45 degrees (Q-bert) and will probably wire it in parallel with the player 1 stick.
: Qbert can easily be played with an 8-way joystick. Just configure Mame to only accept the diagonals for the movement directions.
: : Never know what you might want to add later to use up those #7 and #8 buttons (like maybe, a triggered joystick?) :)
: : : Doug
: : --Teh