Re: Arcade Monitor


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by Cliff on 28, 2000 at 2:33 AM:

In Reply to: Arcade Monitor posted by dhansen on 27, 2000 at 6:55 PM:

Sounds like a 19". You probably won't go wrong w/ a hclock of 15.75 and a vclock of 60. If that works, try expanding your vclock to 50-60 and see if you can get anything in the PAL ranges (~50Hz). If not it's probably a standard NTSC arcade monitor. Also, make sure you have your vga hack cable connected to the Negative sync and not positive on the back of the monitor.

: Help!! I have an arcade monitor and I'm wondering what the hclock and vclock is for it so I can configure Advance Mame. The only markings I can find on the back are 19VMJP22, 19VMNP22, AND 510VJB22. I'm getting bad vertical roll with vertical games so I started using Advance Mame to correct the problem. If it's any help the cabinet was a Moon Patrol that was converted to Altered Beast but the monitor has Dig Dug burned into it.
: Thanks in advance for any help you can provide!!

: Dhansen




Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]