Posted by Nate T. on September 14, 1999 at 18:52:59:
In Reply to: Are you connecting in matrix mode or discrete? (nt) posted by Mr SaLTy on September 14, 1999 at 18:24:19:
Matrix
: : OK, I took a 50-pin SCSI cable and cut the end off and spliced the ends to a barrier strip, and then ran a wire from the strip to the COM on the microswitch. I plugged the end of the cable to the LP24. The encoder programs without a problem, but when I run a keytest program, it is not transmitting any of the joystick moves/button presses. Anyone have any ideas? I also have the NO wired to the common pin on the encoder. Thanks for any help!