Are you connecting in matrix mode or discrete? (nt)


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by Mr SaLTy on September 14, 1999 at 18:24:19:

In Reply to: LP24 Troubles posted by Nate Thompson on September 14, 1999 at 17:58:10:

: OK, I took a 50-pin SCSI cable and cut the end off and spliced the ends to a barrier strip, and then ran a wire from the strip to the COM on the microswitch. I plugged the end of the cable to the LP24. The encoder programs without a problem, but when I run a keytest program, it is not transmitting any of the joystick moves/button presses. Anyone have any ideas? I also have the NO wired to the common pin on the encoder. Thanks for any help!




Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]