Re: yeah baby that's it! Thanks but....


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by Just Michael on 6, 2000 at 1:36 AM:

In Reply to: yeah baby that's it! Thanks but.... posted by itzmr2u on 6, 2000 at 12:48 AM:

: Now I have a picture but it's just a red, green blue screen any suggestions?

I do not have an arcade monitor but it sounds like a test pattern. Check your monitor's manual to find where the test switch is located and turn it off.
:
: : If you have everything wired up correctly, try turning the brightness up on the monitor. When I first tried my JAMMA harness, I got just a black screen (as opposed to while flashing lines when the monitor is on but with no signals) but didn't see anything until I turned up the brightness...even though the monitor worked fine with a real arcade pcb.

: : -Tom A.

: : : I have an arcade monitor that I purchased new. I have it hooked up and when I plug it in it powers up ok but I'm not getting any type of picture. If anyone has any suggestions as to why I'd appreciate it. Could I have the vga cable I made wired incorrctly? Should I get something on the screen besides the blackness anyway? I know it has power I can see it from behind and when you unplug it the screen flashes. Any help would be appreciated. Thanks





Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]