Probably not, but here's a suggestion.

[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by Marshall on 22, 2000 at 2:09 PM:

In Reply to: Internal wiring for spinner USB mouse hack. Possible? posted by JustinT on 22, 2000 at 11:52 AM:

I don't think it will work as you probably need to connect to 2 USB ports. There is no way to connect to the twenty-eight I-Pac inputs, nor to the LED header inputs. You might be able to look at the pinouts for the AT keyboard connector and either run the cable from the I-Pac aux k/b jack or split the cable before it goes to the I-Pac, but I don't recommend this.

Your best bet is to run two cables and connect them together using either zip-ties (crude) or heat shrink tubing (better).

For the spinner, Chris (Fultra) makes a quality product and is very helpful to deal with. He is linked from the spinners page and BYOAC.

Follow Ups:

Post a Followup

Name:
E-Mail:

Subject:

Comments:
: I don't think it will work as you probably need to connect to 2 USB ports. There is no way to connect to the twenty-eight I-Pac inputs, nor to the LED header inputs. You might be able to look at the pinouts for the AT keyboard connector and either run the cable from the I-Pac aux k/b jack or split the cable before it goes to the I-Pac, but I don't recommend this. : Your best bet is to run two cables and connect them together using either zip-ties (crude) or heat shrink tubing (better). : For the spinner, Chris (Fultra) makes a quality product and is very helpful to deal with. He is linked from the spinners page and BYOAC.

Optional Link URL:
Link Title:
Optional Image URL:

[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]