Posted by JustMichael on 14, 2000 at 12:24 AM:
In Reply to: Question posted by bus on 13, 2000 at 11:28 PM:
: Would there be a way to use the Saturn's AV cable to output a JAMMA board's RGB signal to a regular television? Looking at a picture, it seems that it can automagically take an RGB signal and output composite video... (From http://www.gamesx.com/avpinouts/saturnav.htm)
: Thanks! :)
No. To do that you would need another device to convert the RGB and sync signals into composite video. If the pin out shown is correct, you could connect the composite video to a device that has a video input (such as a vcr) then go from there to the tv. And send the rgb and sync to the jamma board. Just don't forget the ground on both.