Re: Need some advice: What's the best wire/solder ????


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]

Posted by Druin on 3, 2000 at 7:07 PM:

In Reply to: Need some advice: What's the best wire/solder ???? posted by purbeast on 3, 2000 at 5:30 PM:

: What is the gauge wire and solder that you all recommend when making a joystick? I need a little advice. Thanks.

Standard wire for these types of low voltage applications would be 22 gauge. the higher the number, the thinner it gets, where 30 gauge is that very thin coil/electromagnet/hobby motor winding stuff.
I think telephone wire is around 24 gauge and that easily breaks, I find.
I'd also recommend stranded as opposed to solid wire for this type of usage, particularly if hooking up to screw terminals, because it's easier to crimp many fine strands of a wire than it is to try to lock on to a single solid wire, especially when you put more than one solid wire in and try to crimp it down, one will likely come loose easily. A poor analogy but good for illustration: Try pulling one strand of your hair. It comes out of your head. Try pulling a handful. your whole head moves with you - it's locked in!
These connections are low voltage, low current, so there's no such risk as using a wire too thin as there would be in household wiring.

Solder is just a matter of making sure it's meant for electrical use and not plumbing (no acid core). The specifics like thickness and lead/tin ratio are a matter of choice. Common is 60/40 ratio, and then there's 63/37 ratio that has different thermal properties (melting point etc) but those delicate details don't matter much for soldering just wire and using heavy duty switch contacts - it's only a big issue with tiny semiconductors that you may fry by applying too much heat for too long, trying to melt the solder.
I normally have thin solder because I can use that for anything, and a 15 watt iron, but I always do find it easier soldering these types of connections using a 100watt gun (instant heat!) and thicker solder, but anything will do.



Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Build Your Own Arcade Controls message board ] [ FAQ ]